VJ-1204 QUICK REFERENCE
3-24 3 Basic usage
3. Place a razor blade on the media cut groove on the media guide, and cut the roll media.
CAUTION
• Pay attention to the following points when you cut roll media. Mishandling the
razor blade may cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
• Cutting roll media is complete.
NOTE
• When loading the new roll media, cut the front edge of the media if it is not straight.
3.7.4 Changing and confirming settings while printing
While the printer is operating, you can change or confirm settings for the Panel setup menu.
3.7.4.1 Procedure for changing and confirming settings while printing
Follow the procedure below to change or confirm settings for the Panel setup menu.
1. Confirm that the printer is in one of the following conditions.
• Receiving
• Converting
• Printing
• Warming up
No. Name
1 Media guide
2 Media cut groove
3 Razor blade
2
1
3
Comments to this Manuals