MUTOH ValueJet VJ-1204 Instruction Manual download pdf (Page 12)

VJ-1204 QUICK REFERENCE

1-4 1 Safety instructions

Pay attention to the following points when handling power cable.

• Do not do anything forcefully on the power cable.

• Do not put heavy objects on the power cable.

• Do not bend, twist or pull the power cable by force.

• Do not route the power cable near heating appliances.

Pay attention to the following points when handling the power supply plug. Any mishandling of the

power cable could cause a fire.

• Make sure that no foreign substances such as dust etc. are stuck to the power plug.

• Make sure that the power plug is firmly inserted to the edge of the power socket.

When handling ink cartridges, pay attention so that ink does not get into your eyes or stick to your

skin. If ink gets into your eyes or sticks to your skin, immediately wash it off with water. Failing to

do so might cause irritation or light inflammation of eyes. In case of any abnormality, consult a

physician immediately.

Do not disassemble ink cartridges. If disassembled, there is a possibility that ink might come into

contact with eyes or skin.

Do not operate the media loading lever during initial operation. The print head portion may touch

the pressurizing roller portion, and cause a malfunction.

Do not touch the media guide during printing. It is hot and may cause a burn.

Do not touch the media feed slot, platen or media guide while heaters are operating. They are hot

and may cause a burn.

Do not use volatile solvents such as thinner, benzene, or alcohol. These solvents could cause damage

to the paint.

Be careful that no moisture enters the printer. There is a possibility that the electric circuit inside the

printer is short circuited.

Do not open covers attached using screws under any circumstances. This may cause an electric shock

or a malfunction.

While cleaning the cleaning wiper

• Do not touch the cleaning wiper and head cap unit.

Head cleaning may not be performed correctly because of oil from your hands.

• Make sure to wipe the print head with a dry poly-knit wiper.

A wet poly-knit wiper may cause the print head to clog.

Do not slant the printer, prop it against a wall or turn it upside down. There is a possibility that ink

inside the printer may leak. Moreover, normal operation after shifting (to these positions) cannot be

guaranteed.

When taking this printer out of the package box, make sure to remove the vinyl sheet and hold the

handles on the side of the printer. If the printer is lifted with the vinyl sheet attached, there is a

possibility that the printer falls slipping from hands and gets damaged.

While installing the stand, be sure to turn OFF the power and pull out the power plug. It could lead

to an electric shock.

When you do not use the printer for a long period, make sure to pull out the power plug from the

power socket for safety.

Make sure to connect an earth wire to the earth connection that meets the following standards.

• Earth terminal of power socket

• Earth wire with copper plate which is buried at 650 mm or more, deep in the ground.

Load roll media on an even surface such as a desk. If you load roll media with the scroller standing

vertical, there is a possibility that the scroller might get damaged.

Keep the work area well-ventilated. This prevents fire, and stops operators from feeling sick from

bad air.

CAUTION

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 109 110

Comments to this Manuals

No comments

MUTOH ValueJet VJ-1204 Instruction Manual Page 12

Comments to this Manuals

Related products and manuals for Print & Scan MUTOH ValueJet VJ-1204