MUTOH ValueJet VJ-1204 Instruction Manual download pdf (Page 49)

VJ-1204 QUICK REFERENCE

3 Basic usage 3-23

3 Basic usage

3.7.2 Stopping printing operation

If you want to stop printing for some reasons, operate as follows.

1. Press the [Cancel] key on the operation panel.

• The printer operates as follows.

NOTE

• If a large amount of data is saved on the printer, the operation panel may not return

to Normal by a single [Cancel] key operation.

In such cases, wait for a few seconds and press the [Cancel] key again.

3.7.3 Cutting media

This sub-section explains how to cut roll media.

Follow the procedure below to cut roll media.

CAUTION

• When printing is finished, the media guide is at high temperature. Wait until the

media guide cools off.

1. Verify the following regarding the operational condition of the product.

• Printing or other operations are not in progress.

• The operation panel display is Normal.

2. If the roll media cut position is changed, refer to "3.7.1 Feeding media" and advance the roll media

to the desired cut position.

Printer status Operation with the [Cancel] key pressed

During printing Terminates printing and deletes the remaining data in the printer.

Receiving/converting Deletes the received/analyzed data and the subsequent data.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 109 110

No comments

MUTOH ValueJet VJ-1204 Instruction Manual Page 49