MUTOH ValueJet VJ-1204 Instruction Manual Page 11
- Page / 110
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
VJ-1204 QUICK REFERENCE
1 Safety instructions 1-3
1 Safety instructions
1.2 Important safety instructions
This section explains general cautions that must be followed in order to use this printer safely.
Do not install this printer in the following places. It may cause an injury if the printer falls down.
• On a shaky stand
• Slanting location
• Places where vibration of other machines etc. is transmitted
Do not stamp on this printer or place heavy things on top of it. It may cause an injury if the printer
falls down.
Do not block the vent by covering the printer with cloths, such as a blanket or tablecloth. If the vent
is blocked, heat may accumulate inside the printer and it may cause fire.
Do not install the printer where it is humid or dusty. It could lead to an electric shock and fire.
Do not use a damaged power cable. It could lead to an electric shock and fire.
Do not take out or insert the power plug with a wet hand. This could lead to an electric shock.
Do not connect an earth wire to the following places.
•Gas pipe
There is a possibility of ignition and explosion.
• Earth wire of telephone cables and lightning rods
Heavy current might flow whenever lightning strikes.
• Water pipe and faucet
The earth might not work if a plastic pipe is connected in the middle of the metal pipe.
Do not store combustible materials on the platen while performing the heater operation. It could lead
to fire.
Do not spill flammable liquid over the platen. This could lead to fire.
Do not insert or drop metal or flammable objects into the printer through openings such as a fresh
air inlet. It could lead to an electric shock or fire.
If foreign substances or liquids such as water entered the printer, do not use the printer as it is. It
could lead to an electric shock or fire. Immediately turn OFF the power switch, disconnect the power
plug from the electric socket, and contact your local MUTOH dealer.
Wire the various cords as directed in the Operation Manual. Mistaken wiring could cause fire.
Be sure to use the power cable supplied with the plotter. Using other power cables can cause an
electric shock or fire.
Make sure to use only the specified power supply (AC 100 V - 120 V or AC 220 V - 240 V). If a
power supply other than the specified voltage is used, it could cause an electric shock and fire.
Take power for the printer directly from the power socket (AC 100 V - 120 V or AC 220 V - 240 V).
Do not use multiple plugs on the same socket. This could generate heat and might cause fire.
Be sure to use a dedicated power socket with earth wire for the power supply, and connect it to the
earth wire. If the earth wire is not connected, an electric shock or fire may occur.
The waste fluid from the printer is industrial waste. Proper waste fluid disposal according to
industrial waste disposal laws and ordinances of your local government is required. Consign disposal
of waste fluids to a specialized processor.
WARNING
- REFERENCE 1
- Important Notice 3
- Warranty Limitations 4
- About this Manual 5
- 4. Manual Notation 6
- Table Of Contents 7
- 1 Safety instructions 11
- 1.3 Warning labels 14
- 1-8 1 Safety instructions 16
- 1-10 1 Safety instructions 18
- 2.1.1 Front section 20
- 2.1.3 Operation panel 22
- 2.2 Printer status 25
- 2-8 2 Product overview 26
- 3.1 Print flow chart 28
- 3.2 Power cable connection 29
- 3-4 3 Basic usage 30
- No. Name 30
- 1AC inlet 30
- 2 Power cable 30
- 3.3 Turning the power ON/OFF 32
- 3-8 3 Basic usage 34
- 1 Media loading lever 34
- 3.4 Installing ink cartridges 35
- 3-10 3 Basic usage 36
- 1 Cleaning cartridge 36
- 2 Ink cartridge slots 36
- 3-12 3 Basic usage 38
- 3.5 Setting media 39
- 3.5.2 Setting roll media 40
- 3-18 3 Basic usage 44
- 3.6.1 System requirements 46
- 3.6.2 Preparing cables 46
- 3.7.1 Feeding media 48
- 3.8.1 Menu setup procedure 52
- (1) Replacement time 56
- (2) Type 56
- 4 Daily Maintenance 57
- 4-4 4 Daily maintenance 58
- 1 Ink cartridge 58
- 4-6 4 Daily maintenance 60
- 1 Waste fluid box 60
- 4-8 4 Daily maintenance 62
- • The printer enters Normal 66
- 4.2 Cleaning the printer 67
- 4.2.3 Head cleaning 70
- 4-18 4 Daily maintenance 72
- 4-22 4 Daily maintenance 76
- 5.1.1 Perform Head cleaning 78
- 5-4 5 Troubleshooting 80
- 5-6 5 Troubleshooting 82
- Alignment Bi-D Q 84
- 5.2 When media is jammed 86
- 5-12 5 Troubleshooting 88
- 1 Roll media 88
- 2 Scroller 88
- 5.3 Troubleshooting 89
- 5.4 Error messages 95
- 5-20 5 Troubleshooting 96
- 5.5 Using Operation Manual CD 97
- 5-22 5 Troubleshooting 98
- VJ-1204 QUICK REFERENCE 100
- 5-24 5 Troubleshooting 100
- Setup menu diagram 103
- A-2 Setup menu diagram 104
- Setup menu diagram A-3 105
- A-4 Setup menu diagram 106
- A-6 Setup menu diagram 108
- 2 Product overview 110
- 3 Basic usage 110
- 4 Daily maintenance 110
- 5 Troubleshooting 110
Related products and manuals for Print & Scan MUTOH ValueJet VJ-1204
Print & Scan MUTOH RJ600EX-B-01 User's Guide
(110 pages)
(110 pages)
Print & Scan MUTOH PJ-2216NXE User's Guide
(266 pages)
(266 pages)
Print & Scan MUTOH VJ-1324 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 2.266 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals