MUTOH ValueJet VJ-1204 Instruction Manual download pdf (Page 30)

VJ-1204 QUICK REFERENCE

3-4 3 Basic usage

2. Connect the power cable to the AC inlet on the back of the printer.

3. Insert the power cable plug firmly in the socket.

WARNING

• Do not take out or insert the power plug with a wet hand. This could lead to an

electric shock.

• Make sure to use only the specified power supply (AC 100 V - 120 V or AC 220 V -

240 V). If a power supply other than the specified voltage is used, it could cause

an electric shock and fire.

• Take power for the printer directly from the power socket (AC 100 V - 120 V or AC

220 V - 240 V). Do not use multiple plugs on the same socket. This could generate

heat and might cause fire.

• Make sure to use a dedicated power socket with an earth terminal for the power

supply, and connect it to an earth terminal. If the earth wire is not connected, an

electric shock or fire may occur.

• Do not connect an earth wire to the following places.

• Gas pipe

There is a possibility of ignition and explosion.

• Earth wire of telephone cables and lightning rods

Heavy current might flow whenever lightning strikes.

• Water pipe and faucet

The earth might not work if a plastic pipe is connected in the middle of the

metal pipe.

No. Name

1AC inlet

2 Power cable

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 109 110

No comments

MUTOH ValueJet VJ-1204 Instruction Manual Page 30