MUTOH Osprey 75 User's Guide download pdf (Page 31)

Operations Instruction Osprey 75/102/130

31 AP-75720, Rev. 2.0 - 28/11/2007

Step 14 : Press the [ENTER] key on the operation panel.

• The following message is displayed on the operation panel.

Step 15 : When the media is set perform following operation

• Do not raise the pressurizing lever, press the [ENTER] key on the operation panel.

• When raising the pressurizing lever, press the [CANCEL] key on the operation panel or wait 10 seconds.

Notes

• Ensure to raise the pressurizing lever when the product is not used for a long time. Not doing so may

damage the pressurizing roller.

• When the pressurizing lever is up or no media is set, the system shift to Step 16 without displaying the

lever select menu.

Step 16 : The product will finish the power OFF operation.

• The following message is displayed on the operation panel.

• If the [ENTER* key is pressed in Step 14, the product will send the media for 0.8m (2.6ft.).

• The pressurizing roller raise.

• The POWER lamp of the operation panel will switch OFF.

• The printer will automatically power OFF.

Notes

• If there are any problems during the power OFF operation, the unit will display a message on the

operation panel, and the operation may stop. If the operation stops, refer to "Troubleshooting", and take

the appropriate measures

Downloaded From ManualsPrinter.com Manuals

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 87 88

No comments

MUTOH Osprey 75 User's Guide Page 31