MUTOH Osprey 75 User's Guide download pdf (Page 68)

Operations Instruction Osprey 75/102/130

AP-75720, Rev. 2.0 68

5.2 HEAD CLEANING BEFORE PRINTING

Be sure to read and understand the safety warnings before handling the printer.

When used?

Before printing, perform purge and head cleaning to clean the print head surfaces and the nozzles.

Procedure:

The procedure consists of 2 parts.

5.2.1 Perform a purge

Step 1 : Switch ON the printer.

Step 2 : Verify the product is in the normal status.

Step 3 : Press the [F4] key of the control panel. See below.

Step 4 : Press the following keys on the control panel to change the settings :

• [F1] key: changing the ink colour

• [F2] key: changing the purge Mode

Notes

• The factory default settings (initial values) are set as follows.

o Ink Colour: All

o Purge mode: Normal

• Normally, there is no need to change the settings.

• For details on the settings, refer to "Head cleaning".

Step 5 : Press the [ENTER] key on the control panel.

• The settings are confirmed.

• The unit will start the purge process.

• Following message appears:

Notes

• When the [CANCEL] key on the control panel is pressed in the purge menu, the unit will return to

normal status without performing the purge process.

Step 6 : Wait until the purge process is completed for all print heads and the control panel has returned to

the normal status.

Downloaded From ManualsPrinter.com Manuals

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 87 88

No comments

MUTOH Osprey 75 User's Guide Page 68