MUTOH Osprey 75 User's Guide download pdf (Page 19)

Operations Instruction Osprey 75/102/130

19 AP-75720, Rev. 2.0 - 28/11/2007

2 PRODUCT OVERVIEW

2.1 PARTS NAME AND FUNCTIONS

2.1.1 Front section

No. Name Function

1 Operation panel

This panel is used to set operational conditions, the status of the printer, and

other functions. (Section : Operation panel)

2 Front cover

This cover keeps the operator safe from the drive parts of the printer while it

is operating. Open and/or close the cover only when performing the

following operations.

• Media setting and replacement

• Cleaning inside the printer

• Media jamming

3 Pressurizing roller

Set inside the front cover. This roller is used to press the media from above

and keep it flat when printing.

4 Platen

Set inside the front cover. There is an ink drying device built in. On the

surface, there is a cutter groove for paper cutting.

5 Media guide

This is used to feed the media smoothly when setting the media and when

printing. There is an ink drying device built in.

6 Foot switch This switch is used to raise and lower the pressurizing roller.

7 Maintenance cover

This is a cover to protect the user from the internal components of the

product. This is opened during the following conditions:

• When Switching the unit ON or OFF

• When cleaning the print head surface.

• When cleaning the print head inside the cover.

There is a waste fluid tray to collect waste fluid from the print head.

8 Waste fluid valve

Opened when discharging waste fluid from the waste fluid tank. This is

normally closed.

Downloaded From ManualsPrinter.com Manuals

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 87 88

No comments

MUTOH Osprey 75 User's Guide Page 19