MUTOH Osprey 75 User's Guide Page 8
- Page / 88
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Operations Instruction Osprey 75/102/130
AP-75720, Rev. 2.0 8
1.4 IMPORTANT SAFETY INSTRUCTIONS
General safety instructions that must be observed to use the equipment safely are explained below.
¾ Do not place the printer in the following areas. Doing so may result in the printer tipping or falling over and
causing injury.
• Unstable surfaces
• Angled place
• Areas subject to vibration by other equipment
¾ Do not stand on or place heavy objects on your printer. Doing so may result in the printer tipping or falling
over and causing injury.
¾ Do not cover the ventilation hole of your printer with cloth, such as a blanket or table cloth. Doing so could
obstruct ventilation and cause fire.
¾ Do not place the printer in humid and dusty areas. Doing so may result in electrical shock or fire.
¾ Do not use a damaged power cable. Doing so may result in electrical shock or fire.
¾ Do not attempt to plug in electrical plugs with wet hands. Doing so may result in electrical shock.
¾ Do not connect earth cables in the following areas.
• Gas pipes
Doing so may cause fire or an explosion.
• Earth terminals for telephone line or lightening rod
Doing so may cause a large flow of voltage if lightening occurs.
• Water pipes or faucets
If there is a plastic part in the pipe, the earth will not work properly.
¾ The ink used in the product contains an organic solvent (CYCLOHEXANONE). It is flammable so open
flame is prohibited in the area. In a dry environment, static electricity can cause ignition, so before handling
the ink, jet wash fluid or waste liquids, touch a metallic object first to remove static electricity from your
body. Do not near materials having static, and take appropriate measures against static electricity.
¾ Do not insert or drop metal or inflammable objects into openings, such as ventilation outlets. This may
cause electrical shock or fire.
¾ Stop using your printer if a liquid is spilled into it. This may cause electrical shock or fire. Switch the printer
OFF as soon as possible, unplug the power cord, contact MUTOH local dealer.
¾ Be sure to use the attached cable. Otherwise, electrical shock or fire may occur.
¾ Be sure to use the specified voltage (AC 100 V- 120 V or AC 220 V - 240 V). Otherwise, electrical shock or
fire may occur.
¾ Use electricity directly from a power outlet (AC 100 V- 120 V or AC 220 V - 240 V). Do not put many loads
on one electrical output. Otherwise, heat may be generated and cause fire.
¾ Be sure to use an outlet with an earth terminal and use the terminal correctly. Otherwise, electrical shock or
fire may occur.
¾ The ink used in this product contains an organic solvent (CYCLOHEXANONE). Make sure to follow the
industrial waste disposal laws and ordinances of your local governments.
It is necessary to install a local ventilation unit, push/pull type ventilation unit, or a total ventilation unit to
perform adequate ventilation.
¾ If ink or jet wash fluid is swallowed, do not make the person throw up, but immediately call a doctor and a
poison management centre.
Downloaded From ManualsPrinter.com Manuals
- Operation 1
- Instructions 1
- COPYRIGHT NOTICE 3
- TABLE OF CONTENTS 5
- AP-75720, Rev. 2.0 6 6
- 1 REGULARISATION AND SAFETY 7
- INFORMATION 7
- 1.5 WARNING LABELS 12
- 1.6 OPERATION LABELS 16
- 2 PRODUCT OVERVIEW 19
- 2.1.2 Rear section 20
- 2.1.3 Operation panel 21
- 2.2 IN-THE-BOX CONTENTS 23
- 2.2.4 Core Brace Set 24
- 2.2.3 Starterkit 24
- AP-75720, Rev. 2.0 26 26
- 3 BASICS 27
- 3.2 MEDIA HANDLING 32
- 3.2.3 Loading roll media 36
- 3.2.4 Setting winding unit 40
- 3.2.5 Setting media type 43
- (1) Refilling period 45
- (2) Types 46
- (3) Refilling procedure 46
- 3.4 DISPOSAL OF WASTE FLUIDS 47
- (1) Before the transfer 48
- (2) After the transfer 49
- 3.6 LONGSTORE 50
- AP-75720, Rev. 2.0 54 54
- 4 PERIODICAL MAINTENANCE 55
- (1) Cleaning period 56
- (2) Cleaning Procedure 56
- No. Name 57
- 4.1.6 Washing print head 58
- 4.2.1 Replacing ink filter 62
- 5.1 USING MEDIA 63
- 5.1.4 The printing area 64
- 5.2.1 Perform a purge 68
- 5.2.2 Wipe the heads 69
- 5.3.1 Basics about the step 70
- 5.4 PRINTING FLOW 72
- 6 PRINTER MENU 73
- 6.1.2 Menu screen 74
- 6.1.3 Changing 74
- between the screens 74
- 6.2.1 [F1] – Cancel 75
- 6.3.1 Parameter change 80
- 6.3.2 HEATER 81
- 6.3.4 Changing Printing Mode 82
- 6.5 SETUP MENU 85
- AP-75720, Rev. 2.0 86 86
- AP-75720, Rev. 2.0 88 88
Related products and manuals for Print & Scan MUTOH Osprey 75
Print & Scan MUTOH Winder 100 Specifications
(84 pages)
(84 pages)
Print & Scan MUTOH ValueJet VJ-1204 User's Guide
(121 pages)
(121 pages)
Print & Scan MUTOH Osprey 102 User's Guide
(176 pages)
(176 pages)
Print & Scan MUTOH Winder 30 User's Guide
(39 pages)
(39 pages)
Print & Scan MUTOH ValueJet 1604 User Manual
(71 pages)
(71 pages)
Print & Scan MUTOH PJ-2216NXE Specifications
(298 pages)
(298 pages)
(66 pages)
Print & Scan MUTOH RJ600EX-B-01 User's Guide
(100 pages)
(100 pages)
Print & Scan MUTOH RJ600EX-B-01 User's Guide
(110 pages)
(110 pages)
Print & Scan MUTOH PJ-2216NXE User's Guide
(266 pages)
(266 pages)
Print & Scan MUTOH VJ-1324 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 0.867 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals