MUTOH Osprey 75 User's Guide download pdf (Page 11)

Operations Instruction Osprey 75/102/130

11 AP-75720, Rev. 2.0 - 28/11/2007

¾ Keep the print head cap away from the dust and other contaminants. Otherwise the print head may

become clogged.

¾ Do not cut a poly-nit wiper over the print head cap. Otherwise the print head may become clogged with lint.

¾ Be sure to remove pilling and lint on the cutting edge of poly-knit wiper. Otherwise the printhead may

become clogged.

¾ When the cap sponges and the poly-net wipers become dry, always replace them with new ones.

Otherwise the print head may become clogged.

¾ Keep the print head cap clean when using, otherwise the print head may become clogged.

¾ When switching the power OFF, always install the print head cap. Otherwise the nozzle may become

clogged.

¾ In connecting the network interface, ensure the following precautions. Wrong handling may cause electric

shock and/or fire.

¾ Never touch the connection terminals.

¾ Do not connect cables of different connection terminals in shape

¾ Carefully open/close the ink box cover to avoid finger pinching.

¾ When the sponge for spitting box is replaced, be careful of waste fluid not to be spilled out.

¾ If waste fluid comes into contact with the grid roller, the surface of the grid roller will be damaged. And the

media feed function may be affected.

¾ Please bump to the rear side without fail and install it when you install sponge for spitting box. The waste

liquid might overflow.

¾ When performing washing print head, always wear the protective gloves supplied with the unit.

Downloaded From ManualsPrinter.com Manuals

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 87 88

No comments

MUTOH Osprey 75 User's Guide Page 11