User’s Guide ValueJet 1204
Chapter 4: Handling the printer
90 AP-75740 – Rev 1.2 – 6/07/2011
—
• [Cancel] key: Shift to the previous hierarchy.
4.8.15 Roll Length menu
Set up the roll media length.
Setup Item Setting Value Description
Roll media
<Off> Roll Length is not used.
Roll1 Set up the roll media length.
The Roll Length setting can be set for "Roll1" to "Roll3".
Roll2
Roll3
—
• [Cancel] key: Cancel the setting and shift to the previous
hierarchy.
4.8.15.1 Roll
Length menu
Set up the roll media length.
Setup Item Setting Value Description
Length 1m to <30m> to 99m
Set the roll media length.
Notes
• When replacing the roll media, adjust the roll media
length again.
• If the roll media length is not set, the residual quantity
of roll media will not be displayed correctly.
—
• [Enter] key: Save the setting value and shift to the previous
hierarchy.
• [Cancel] key: Cancel the setting and shift to the previous
hierarchy.
4.8.16 Head Wash menu
Perform head cleaning.
Notes
• Make sure to use a genuine cleaning fluid (model N°: RJ80U-22-CLN).
Setup Item Setting Value Description
Head Wash
Start
Perform head cleaning.
• [Enter] key:
Perform the head cleaning operation.
The operation panel displays the following contents.
Remove
cassettes
Remove the ink cassette, and install the cleaning cassette.
—
• [Cancel] key: Shift to the previous hierarchy without the head cleaning
operation
Comments to this Manuals