User’s Guide ValueJet 1204
Chapter 4: Handling the printer
58 AP-75740 – Rev 1.2 – 6/07/2011
4.4.3 Setting media type
Introduction:
When loading the media in a ValueJet, you’ll have to set the media type. The Media setup menu is displayed
after the media hold lever is pushed from the backward position to the forward position. (= lever down)
N° Name
1 Media hold lever
Notes
• The printer starts the media initialization without setting the media type when
o The [Cancel] key is pressed.
o No key operations are performed on the operation panel for 10 seconds.
Procedure:
Step 1 : Verify that the printer is switched ON and media is loaded.
Result: After the media is loaded, the display shifts to the Media setup menu.
Notes
• Refer to the following topics for media loading:
o Installing roll media
o Loading roll media
Comments to this Manuals