MUTOH Osprey 102 User's Guide download pdf (Page 109)

User’s Guide – Osprey 75/102/130

Chapter 6: Printer menu

109 AP-75102, Rev. 2.0, 28/11/2007

6.3.4 Changing Printing Mode

When the product is at a normal condition, press the [ENTER]-key to change the setup of the Printing Mode.

Step 1: Press the [ENTER] key on the control panel.

• The printer will shift to the ‘Printing mode’ Setup menu.

Step 2: Press the [F1] till [F4] keys to change Printing mode. See table below for further information.

Setup items Key

name

Parameters Descriptions

360dpi×180dpi To set the printing quality to 360 dpi × 180 dpi

360dpi×360dpi To set the printing quality to 360 dpi × 360 dpi

Printing quality F1

360dpi×720dpi To set the printing quality to 360 dpi × 720 dpi

OFF To set the interlace method to OFF.

InterLace Setup F2

2 pass To set the interlace method to two path.

Quality

preference

To set the priority to Quality preference.

Priority F3

Speed

preference

To set the priority to Speed preference.

Uni Dir. To set the printing direction to uni-direction.

Printing direction F4

Bi Dir. To set the printing direction to bi-direction.

Step 3: Press the [ENTER] key after completion of setup.

• The setup has changed and the product shifts to the normal condition.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 175 176

No comments

MUTOH Osprey 102 User's Guide Page 109